Flight Trace records your flight with your iPhone or iPad GPS while you fly, and shows you the trace after you land. It is for your own review: a picture of where you went, when the wheels left and met the ground, and what you might want in your logbook. Every Flight Trace screen carries the module's framing: "Approximate GPS trace for personal review - not an approved flight recorder, not for navigation."
How to start a recording
- Tap the Record a flight card on Home (or Record on the Home flight card while a flight is under way), Record this sector on a leg in a flight folder, the record button at the top of the Logbook, or Flight Trace under Logbook & admin on the Tools tab. You can also long-press the app icon and choose Record a flight.
- The Record a flight sheet checks location, GPS, battery and heat. A problem shows as a row with its fix on the right; a check that passes shows as a quiet tick.
- Pick the aircraft, your role and the category with the chips if you like - all optional. Past traces on the sheet opens your earlier traces in the Logbook. If you fly with an ADS-B receiver, or want a barometer-only time-and-altitude recording, choose the source here.
- Tap Start recording.
The recording screen opens with the REC chip and the timer, and a REC pill sits at the top of every tab until you stop.


What the recording screen shows
| Control | What it does |
|---|---|
| Done (top left) | Closes the screen; the recording carries on and the REC pill brings you back |
| OUT, OFF, ON, IN lights | Light as the phase changes, provisional until Flight Trace is sure |
| Status panel | GPS, battery, phone temperature and the elapsed time |
| Marker | Drops a marker at this moment to find on the trace later and add a note |
| Dim | Turns the screen nearly dark with the four lights small and dim; tap to wake |
| Hold to stop | Hold for one second while the ring fills, or tap it and confirm |

How to stop
- Hold Hold to stop for one second, or tap it and confirm.
- Or let it stop by itself: Flight Trace stops a while after you park, with a warning two minutes before so a taxi back for another circuit is not cut off. If you have not moved for a long time it asks Still recording? Both are set in Settings > Flight Trace.

- Flight saved shows the block and air time and says plainly if anything is missing. Tap Review trace.

How to read a trace
The trace screen is titled with the route and shows it on Apple Maps when you are online, with an Apple Maps / Aviation chart switch above it that picks the offline chart where a chart pack covers the trace (chart paper otherwise). Under the map, Route, Departure and Arrival frame the whole flight or each field's ground movement, with the take-off and landing rolls drawn as measured segments on the runway. Then come the altitude profile you can drag along, the four times in UTC with block and air time, the stats, and an events list where every take-off, landing, touch-and-go, gap and marker has a time and a tag.
- One colour per phase of flight. Taxi out, climb, cruise, descent and taxi in each have their own colour on the route, on a phase strip above the profile and on the profile line, with a legend naming them. Tap a phase on the strip to move the cursor to its start. A phase Flight Trace did not find is left out rather than guessed; a circuit lap is one airborne segment.
- Events, key or all. Key keeps the block times, landings, markers, notes and one folded line for the GPS gaps; All lists everything. Repeats fold into one line with a count and a time span that you can open, so thirty screen locks read as one row.



- GPS altitude is always labelled GPS altitude, approximate. It is not what the altimeter showed.
- A part with no GPS is drawn as a dashed straight line between the fixes either side, never filled in. One chip under the title counts the gaps and their total time ("10 GPS gaps, 38 min") and opens the list, where picking a gap moves the cursor to it. A full warning card appears only when a gap cost something, such as a take-off or landing the debrief could not place.
- Partial trace, GPS interference suspected, Simulated location, Started airborne and Ground only say plainly when a trace is not whole.
- A trace that ended in the air keeps its map locked for 20 minutes after it ends. Stats and times show at once.
You can trim the start or end, split at the profile cursor or merge with the next trace. Edits are kept beside the recording, never written over it.
How to read the debrief
Under the stats, the Debrief measures what happened on and around each runway, after the flight. It waits for the map lock like the map does.
- Runway cards. Each runway you used is drawn to scale with every take-off and landing on it: where the roll started, the estimated lift-off and touchdown with their plus-or-minus, where you slowed to taxi pace, the turn-off and how much runway was left.
- Final approach. Each landing lists where you lined up, your ground speed over the last 2 NM, which side you joined from and how far the turn onto final went past the centreline.
- Weather at the moment. The METAR in force at each take-off and landing, with the wind on the runway you used, the raw report and where it came from. It is fetched once per aerodrome when the trace is less than 30 days old and you have a connection.
- Circuits compare every lap side by side (free on your first 3 flights, then Pro). Turns and holds lists complete 360s and holds with their time, height kept and an estimated bank. On the ground gives taxi time and distance.

Tap any row to move the cursor on the map and profile to that moment. Speeds are ground speed, not airspeed. Runway distances need the runway ends surveyed in the airport database; when they, the published length or the GPS are not good enough, the card says so instead of guessing. The debrief is for your own review, not an assessment of the flight or the pilot.
How to fill in your logbook from a trace
Fill-in follows the logbook allowance: free with a signed-in free account up to 300 logged hours, then part of Pro.
- Open the trace and find the Fill in your logbook card.
- Each leg is matched to a flight folder leg, a duty sector or a new logbook entry. Every value says from trace; one Flight Trace is not sure of carries a Check chip.
- Review every field and save. Nothing is written until you do, and a value the trace cannot tell is left empty, never filled with zero.

How to share an image
- Open the trace and tap Share image.
- Pick a layout: Plate, Strip or Map (Map needs a downloaded chart pack covering the trace, and waits until the map unlocks).
- Hide the date, the times or the registration, callsign and flight number if you like.
- Draw privacy zones around places you would rather not show. Shared images leave out the track inside them, with no line into them. Zones stay on this device.

Your traces in the Logbook
- The top of Entries switches between All, Traced and Gallery. Traced keeps only the entries with a trace; Gallery shows each trace as a card with its map, start time, distance and a small altitude profile.

- My sky draws every trace on the Logbook map, with filters by year, aircraft and role and totals such as distance recorded and aerodromes landed at.
- Export writes a trace as GPX, KML or CSV; import reads your own CSV track files. Like fill-in and My sky, both are free with a free account up to 300 logged hours, then Pro.
- PDF debrief, beside the export buttons, makes a one-page A4 summary to print: the four times, the track on a map (privacy zones left out), the stats and profile, each runway with its take-offs and landings, circuits, turns, the METARs used and space for your notes. A long session continues on more pages. It follows the same terms as export and waits for the map lock. Open a sample PDF debrief from a simulated circuits session at Oxford.

On iPad
In portrait the trace pairs the four times with the stats, and the events with the logbook fill-in. In landscape it is a split view: the map, profile and replay stay pinned on the left while the details scroll on the right.
On Pilot EFB Desk
The Desk never records. A trace you recorded on your iPhone or iPad and synced opens on the Desk in a replay workbench: the trace on the chart map, the profile with a transport bar and the phase strip, and an inspector with Flight, Runways, Logbook and Events tabs - the same runway debrief and logbook fill-in as the phone - plus the reading at the cursor, which names the phase and says "No GPS here" inside a gap. Space plays, J and L change speed, F follows the cursor, V shows the altitude curtain and C compares two laps or two flights. The same 20-minute map lock applies.
Sync and privacy
Traces stay on your device until you turn on Sync traces in Settings > Flight Trace. With it on, a signed-in account backs them up; seeing them on your other devices needs Pro, the same rule as the logbook. Turning it off stops uploads and offers to delete the synced copies; the traces on your device stay. Flight Trace uses your GPS only while you record.
Free vs Pro in Flight Trace
| Free | Pro | |
|---|---|---|
| Recording | Unlimited, signed in or not | Unlimited |
| The trace: map, profile, times, stats, events, markers | Included | Included |
| The debrief: runways, final approach, weather, turns and holds | Included | Included |
| Share images | Included | Included |
| Backup to your account | Included once Sync traces is on | Included, and on your other devices |
| Replay, altitude curtain, circuits, laps | Your first 3 flights | Every flight |
| Logbook fill-in, My sky | Free account, up to 300 logged hours | Included |
| PDF debrief, GPX, KML and CSV export, CSV import | Free account, up to 300 logged hours | Included |
Your first 3 flights are counted on the device the first time you open each trace, and stay unlocked for good; a recording on the ground only does not use one. A recording never stops or hides because Pro ends - only the Pro views lock.
Troubleshooting
The recording stopped when I closed the app. iOS stops recording for an app swiped away in the app switcher. Lock the phone instead.
The map says it is locked. A trace that ended in the air keeps its map hidden for 20 minutes after it ends. The stats, times and profile are there straight away.
The start sheet says Approximate location only. Turn on Precise Location for Pilot EFB in iOS Settings. A trace needs it.
Part of my flight is a dashed line. The phone had no GPS there. The gap is shown as it was, with its length, and is never filled in.
Where next
- Logbook - where your traces and the entries they fill in live.
- Flights - flight folders and the Record this sector button on each leg.
- Free vs Pro - what Pro unlocks, priced.